Give Push to your Success with CCNP Enterprise 300-430 Exam Questions [Q78-Q92]

Q78. Refer to the exhibit.

An engineer needs to configure location services in an office. The requirement is to use FastLocate and achieve higher locations refresh rates. Which location-based technique should be implemented?

probe-based

location patterning

data packet-based

angulation

Q79. A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?

Configure an AVC profile for the Jabber traffic and apply it to the WLAN.

Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.

Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.

Configure QoS on the mobile devices that have Jabber installed.

Q80. A network engineer is implementing a wireless network and is considering deploying a single SSID for device onboarding.
Which option is a benefit of using dual SSIDs with a captive portal on the onboard SSID compared to a single SSID solution?

limit of a single device per user

restrict allowed devices types

allow multiple devices per user

minimize client configuration errors

Q81. An engineer must create an account to log in to the CLI of an access point for troubleshooting. Which configuration on the WLC will accomplish this?

ReadWrite User Access Mode

Global Configuration Enable Password

SNMP V3 User

Allow New Telnet Sessions

Q82. The network management team in a large shopping center has detected numerous rogue APs from local coffee shops that are broadcasting SSIDs. All of these SSIDs have names starting with ATC (for example, ATC302, ATC011, and ATC566). A wireless network engineer must appropriately classify these SSIDs using the Rogue Rules feature. Drag and drop the options from the left onto the categories in which they must be used on the right. Not all options are used.

Q83. What is configured to use more than one port on the OEAP to extend the wired network’s?

AAA override

client load balancing

remote LAN ACL

remote LAN

Q84. An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

pre-authentication

local EAP

authentication caching

Cisco Centralized Key Management

Q85. An engineer must configure MSE to provide guests access using social media authentication. Which service does the engineer configure so that guests use Facebook credentials to authenticate’?

Visitor Connect

Client Connect

Social Connect

Guest Connect

Q86. Refer to the exhibit.

A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?

Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.

Disable DHCP proxy on the Cisco WLC.

Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.

Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.

Q87. An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?

analytics

connect and engage

presence

detect and locate.

Q88. A wireless engineer is configuring LWA using ISE. The customer is a startup company and requested the wireless users to authenticate against a directory, but LDAP is unavailable. Which solution should be proposed in order to have the same security and user experience?

Use SAML.

Use the internal database of the RADIUS server.

Use a preshared key on the corporate WLAN.

Use Novell eDirectory.

Q89. An engineer must run a Client Traffic Stream Metrics report in Cisco Prime Infrastructure. Which task must be run before the report?

scheduled report

radio performance

client status

software

Q90. An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)

Static WEP + 802.1X

WPA+WPA2

Static WEP

CKIP

802.1X