Prepare Top HP HPE7-V01 Exam Study Guide Practice Questions Edition [Q11-Q28]

QUESTION 11
Your customer wants to simplify storage management for their VMware-based environment by configuring HPE Storage Integration Pack for VMware vCenter Server. They want to use HPE OneView for VMware vCenter Server for ESXi deployment.
Currently, they have 30 HPE ProLiant 380 Gen10 Plus deployed with ESXi 7.x and they plan to add 30 additional systems with exactly the same setup. Storage capacity is provided by HPE Alletra and HPE Primera arrays.
Which statement about the configuration and customer requirements is correct?

Your customer must purchase the appropriate number of licenses for HPE Storage Integration Pack for VMware vCenter Server and HPE OneView for VMware vCenter Server.

Any single storage component added to HPE Storage Integration Pack for VMware vCenter Server must have a capacity-based license assigned.

Using HPE Storage Integration Pack for VMware vCenter Server for VVol creation is only supported if the ESXi systems have vSphere Enterprise Plus licenses assigned.

HPE OneView for VMware vCenter Server is available for all customers managing their systems using HPE OneView without any additional cost.

QUESTION 12
Your customer has HPE Superdome Flex running VMware ESXi 8.x. Current setup consists of:
* One Rack Management Controller
* One HPE Superdome Flex Base chassis
* One HPE Superdome Flex Expansion chassis
The existing complex has a single nPartition. The customer plans to expand the existing nPartition with two additional expansion chassis.
Which statement about the planned expansion is true?

If the existing nPartition is managed using HPE OneView, it must be removed before an expansion.

Customer has to replace one of the expansion chassis with base chassis, to provide I/O redundancy.

In order to add two additional chassis, customer has to power off the existing nPartition.

Existing nPartition must be placed in the maintenance mode using Rack Management Controller CLI.

QUESTION 13
You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Module for Synergy
* 8 HPE Synergy 50Gb Interconnect Link Module
* 60 HPE Synergy 480 Gen11
Which statement describes the business and financial benefits for this new solution on the customer?

HPE Synergy supports master/satellite approach that requires less HPE Virtual Connect modules, and so will be more economical.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules which provides better scalability and expansion possibilities.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.

HPE Synergy needs more HPE Virtual Connect modules because of the increased bandwidth for Gen11 compute nodes.

QUESTION 14
Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage.
They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure. The servers will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide a lossless fabric for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?

Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Use RoCEv2 and properly design networking map for the Layer 3 interfaces on the path.

The Aruba CX 8325 switches must be changed to Aruba CX 8400 to support Data Center Bridging eXchange (DCBX).

The HPE Synergy frames must be connected to different switches for RoCE traffic and Ethernet traffic.

QUESTION 15
Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure.
Their existing environment includes the following configurations:
* All ESXi systems are located in the same datacenter
* Virtual machines are protected by an HA cluster
* Some of the VMs are protected with Fault Tolerance
* HPE Synergy 480 Gen11 is the compute platform
* HPE Alletra Storage MP B10000 array for storage
* Orchestrated failover for all VMs using VMware tools
The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0.
Which component or configuration is a necessary part of a solution that will meet all customer requirements?

HPE Synergy frames from the secondary site added to the logical enclosure configured in the primary site.

Storage policy-based management (SPBM) must be configured for a group of the virtual machines.

Synchronous replication configured between sites to replicate the volumes used to build the datastores.

Asynchronous replication configured between sites used to replicate the volumes used to build the datastores.

QUESTION 16
Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-premises utilities.
How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?

By deploying the Data Services Connector VM and importing the cluster to DSCC.

By introducing the cluster as a PCBE setup integrated with DSCC.

By replacing the iLO using the HPE Compute Ops Management activation process.

By configuring the OmniStack integration with HPE InfoSight.

QUESTION 17
You are validating the hardware architecture for an AI solution.
Your customer has requested that you focus on possible upgrades for their HPE ProLiant Compute DL384 Gen12 server.
Which of the following statements is correct?

The GPU performance can be increased by adding more Nvidia GB200 accelerators.

The Superchips on the server include a fixed amount for the memory configuration.

The amount of supported EDSFF drives depends on the selected RAID controller.

The 400Gb NICs can be added if liquid cooling is used with the chassis.

QUESTION 18
Which statement about the security of HPE solutions is correct?

Aruba switches have the Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.

Aruba CX 6300 Switch Series has Pensando ASIC integrated, which provides security services like firewall, micro-segmentation, and telemetry.

HPE Apollo Gen10 or later systems and ProLiant Gen10 or later systems support Pensando Distributed Services Cards.

HPE Superdome Flex supports Pensando Distributed Services Cards with additional licenses per HPE Superdome Flex chassis.

QUESTION 19
Your customer is considering HPE Nimble or HPE Primera for use as a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Nimble, your customer will be able to access the protected volume via the target storage array.

With Nimble, your customer will be able to combine an Active Peer Persistence variant with a 1-1 topology.

With Nimble, your customer will be able to deploy Witness/Quorum via OVA image.

With Primera, your customer will be able to deploy Quorum Witness via OVA image.

QUESTION 20
Your customer is expecting to see an increase in the amount of data stored on their HPE Alletra Storage MP B10000.
They are asking to create a plan to support a raw capacity of 450 TB all flash.
Refer to exhibit

What change would you recommend to the configuration to achieve this?

Add 100Gb HBAs to B10120 nodes and additional drive shelf.

Replace the QLC drives with higher capacity TLC drives.

Add more QLC drives to the system and change the sparing to minimal.

Replace the nodes with B10120 model and add additional drive shelf.

QUESTION 21
Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Management of Pensando cards in the servers.

VLAN visibility of VMware on non-HPE servers.

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

QUESTION 22
Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure.
Their existing environment includes the following configurations:
* All ESXi systems are located in the same datacenter
* vSphere replication is deployed for VM DR
* Some of the VMs are protected with Fault Tolerance
* HPE Synergy 480 Gen11 is a compute platform
* HPE Alletra Storage MP B10000 arrays for storage
* Orchestrated failover for all VMs using VMware tools
The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0.
Which component or configuration is a necessary part of a solution that will meet all customer requirements?

HPE Synergy frames from the secondary site added to the logical enclosure configured in the primary site.

Storage policy-based management (SPBM) must be configured for a group of the virtual machines.

Synchronous replication configured between sites to replicate the volumes used to build the datastores.

Asynchronous replication configured between sites used to replicate the volumes used to build the datastores.

QUESTION 23
Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use as a Peer Persistence enabling platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Alletra 6000 your customer will be able to combine an Active Peer Persistence environment with a one-to-many topology.

With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware.

With HPE Alletra Storage MP B10000 your customer will be able to combine an Active Peer Persistence environment with a one-to-many topology.

With HPE Alletra Storage MP B10000 your customer will be able to use FC for underlying replication.

QUESTION 24
Your customer is considering HPE SimpliVity or HPE Synergy with HPE Alletra Storage MP B10000 for a virtualization project.
Which statement about these platforms and their benefits is true?

Traditional VMware clusters support up to 96 nodes, while HPE SimpliVity clusters support significantly fewer nodes in a single cluster.

HPE Synergy has all required VMware Standard subscriptions embedded with the product, while standard deployment requires purchasing additional VMware subscriptions.

HPE Alletra Storage MP B10000 can only be used to create VMFS datastores, while HPE Synergy supports a variety of storage options including vVols, NFS, and VMFS.

HPE Synergy storage management can be simplified with HPE Storage Integration Pack for VMware vCenter Server, once gateway licenses are added.

QUESTION 25
You are designing an HPE solution for SAP HANA. You are considering an as-a-service approach as one of the variants to be proposed to the customer.
What is true regarding HPE GreenLake for SAP HANA?

HPE GreenLake for SAP HANA requires an onsite HPE Alletra Storage MP X10000.

HPE GreenLake for SAP HANA offers billing based on GB of RAM used by SAP HANA.

HPE GreenLake for SAP HANA can be used for SAP HANA instances running in the public cloud.

HPE GreenLake for SAP HANA offers billing based on the amount of users using SAP HANA.

QUESTION 26
Your customer is in the early stages of an AI project. They are requesting a POC demonstrating how they can utilize on-prem data with a limited amount of rack space, in an air-cooled environment.
Performance with the AI use case of Retrieval-Augmented Generation (RAG) will be the primary factor in their decision making.
Which HPE Compute offering would be suitable in this scenario?

HPE ProLiant Compute DL560a Gen12 with NVIDIA H200 NVL GPUs.

HPE ProLiant Compute DL384 Gen12 with NVIDIA GH200 NVL2.

HPE ProLiant Compute DL320 Gen11 with NVIDIA L4 GPUs.

HPE Cray XD670 with NVIDIA H200 Tensor Core GPUs.

QUESTION 27
Your customer is requesting an update to their data protection plan, to include a copy of several volumes to two different locations. The current environment is utilizing HPE Alletra Storage MP B10000 systems.
What is true about this solution?

Synchronous replication can be used to define two destination targets, when appropriate license is installed.

Synchronous replication can be configured between three arrays.

Asynchronous replication can be configured between three arrays.

A synchronous long-distance periodic copy configuration can be used to define two destination targets.

QUESTION 28
Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage. They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure.
The frames will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide lossless traffic for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?

Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Server Profiles should include redundant connections to a RoCE network.

Create DCB queues using server’s operating system utility.

Assign two different priority values to RoCE traffic.