Pass HP HPE6-A72 exam Dumps 100 Pass Guarantee With Latest Demo [Q50-Q65]

Q50. What are the commands to disable SSH and HTTPS services from the default VRF?

Core-1(config)# no ssh server
Core-1(config)# no https-server

Core-1# no ssh server vrf default
Core-1# no https-server vrf default

Core-1(config)# no ssh server enable
Core-1(config)# no https-server enable

Core-1(config)# no ssh server vrf default
Core-1(config)# no https-server vrf default

Q51. Click on the colored box that corresponds with the line that best represents Unicast traffic flow.

Q52. Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?

10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet

Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet

10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet

10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet

Q53. Match each network protocol to the correct default listening port and transport protocol. Not all answers will be used.

Q54. Refer to the exhibit.

You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?

Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2

Q55. Which two statements accurately describe the features of NetEdit? (Choose two.)

NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.

NetEdit includes trial licensing for up to 10 nodes.

NetEdit can perform configuration and compliance validation.

NetEdit supports viewing and editing multiple devices using a single deployment plan.

NetEdit can run on a mobile device using Android or Apple IOS.

Q56. What is the login and password combination is used when first configuring an Aruba OS-CX switch from factory defaults?

Q57. Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?

switch(config-if)# no lldp interface (port) transmit

switch(config-if)# no lldp transmit

switch(config-if)# no lldp receive

switch(config)# no lldp

Q58. Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)

Rolling back to a prior checkpoint triggers a reboot of the switch.

Stacking switches using VSF or VSX will disable the Checkpoint feature.

A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.

System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.

Q59. Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

Core(config-if-vlan)# vrf attach Green

Core(config-if-vlan)# ip vpn-instance Green

Core(config-if-vlan)# ip vrf forwarding Green

Core(config-if-vlan)# routing-context Green vrf

Q60. Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)

Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.

Improved performance by offloading processing from the Access layer to the Core.

Use of layer 2 switches at the access layer can process and route traffic from attached APs.

Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.

Provides a more cost effective solution given that no additional switches are required for a third tier.

Q61. Click on the colored box that corresponds with the line that best represents Multicast traffic flow.

Q62. Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?

show interface vlan 1111

show interface 1/1/1

show interface gigabit 1/1/1

show vlan 1111

Q63. Which switches support Aruba Virtual Switching Extension (VSX)? (Choose two.)

Aruba 6405

Aruba 2930F

Aruba 8400

Aruba 5406R

Aruba 8350

Q64. Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

Q65. Refer to the exhibit.

Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?