Get Ready to Pass the D-PE-OE-23 exam with EMC Latest Practice Exam [Q24-Q48]

September 15, 2025 admin 0

Categories : D-PE-OE-23 , EMC

Rate this post

Get Ready to Pass the D-PE-OE-23 exam with EMC Latest Practice Exam

Get Prepared for Your D-PE-OE-23 Exam With Actual EMC Study Guide!

EMC D-PE-OE-23 Exam Syllabus Topics:

Topic	Details
Topic 1	System Administration: This section of the exam measures the skills of Dell System Administrators and covers verifying health status and managing iDRAC licenses.
Topic 2	Server Management and Configuration Tools: This section of the exam measures the skills of Dell Technical Support Engineers and covers the functions of iDRAC, including login procedures and connection methods. It explains various management interface options like LCC and racadm, as well as in-band and out-of-band management techniques.
Topic 3	Server Troubleshooting: This section of the exam measures the skills of Dell Technical Support Engineers and covers analyzing visual indicators on server components such as system IDs and power supply units.
Topic 4	Server Components: This section of the exam measures the skills of Dell System Administrators and covers various server components, including processors, memory options, and configurations. It also addresses power options, redundancy features, thermal management, and liquid cooling systems.
Topic 5	Server Portfolio and Features: This section of the exam measures the skills of Dell System Administrators and Dell Technical Support Engineers and covers the definitions of chassis form factors and their numbering systems.

NEW QUESTION 24
What happens when the Hardware Root of Trust fails to validate the BIOS?

Boot Guard switches over to the backup BIOS and logs a warning in the system event log.

Automated BIOS Recovery process recovers the BIOS from the DUP saved in the control panel.

The server continues running and logs a critical error in the system event log.

The server shuts down and logs a critical error in the system event log.

NEW QUESTION 25
iDRAC9 System Lockdown Mode is enabled.
In addition to the Power cap setting and System power operations, which settings can an administrator access?

Update firmware
Diagnostics

Update firmware
Lifecycle Controller

Part replacement
Lifecycle Controller

Part replacement
Diagnostics

NEW QUESTION 26
A server has two power supply units (PSUs) in a redundant configuration. One power supply unit fails. A technician replaces the failed PSU, but the server does NOT return to redundant power mode.
What is the cause of this issue?

The new PSU has a different wattage than the existing PSU.

The server has NOT been Power Cycles to bring the new PSU online.

The power redundant options is disabled in the System Setup Utility.

Both PSUs were NOT replaced at the same time.

NEW QUESTION 27
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

SupportAssist Enterprise

iSM

OpenManage Essentials

iDRAC9

NEW QUESTION 28
A technician has received a new server with 5 drives and needs to configure the drives into a specific configuration as provided by the administrator.
The administrator will also add additional disks as separate raid arrays at a later date.
– Drive 0 is passed through to the OS (to be managed by the OS)
– Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5 How should the technician do this in the PERC BIOS?

Set drive 0 to Ready, set drives 1-3 as a RAID 5, and drive 4 as a Global Hot Spare

Set drive 0 to Ready, set drives 1-3 as a RAID 5, and drive 4 as a Dedicated Hot Spare

Set drive 0 to Non-Raid, set drives 1-3 as a RAID 5, and drive 4 as a Global Hot Spare

Set drive 0 to Non-Raid, set drives 1-3 as a RAID 5, and drive 4 as a Dedicated Hot Spare

NEW QUESTION 29
A system administrator needs to install OpenManage Server Administrator on 200 servers.
What is the quickest way to meet this requirement?

Use the Lifecycle Controller to install OpenManage Server Administrator on each server.

Install OME and push OpenManage Server Administrator to all 200 servers.

Use Microsoft utilities to automate the deployment of OpenManage Server Administrator.

Download OpenManage Server Administrator from Dell.com and install on each server.

NEW QUESTION 30
Due to recent security breaches and to avoid accidental changes made by the junior IT staff, an administrator would like to prevent unwanted configuration changes in the iDRAC UI.

See the Explanation for Step by Step solution.
Explanation:
To prevent unwanted configuration changes in the iDRAC UI, you can adjust user roles, permissions, or enable specific security settings to restrict access for junior IT staff. Here are the steps to secure the iDRAC configuration:
Step-by-Step Guide:
* Access User Settings:
* In the iDRAC interface, navigate to iDRAC Settings from the main menu.
* Choose User Authentication or Users to manage user accounts and permissions.
* Adjust User Roles and Permissions:
* Identify the accounts associated with junior IT staff.
* For each user account, adjust the role to Read-Only if you want them to have view-only access without making configuration changes.
* Alternatively, set their permissions to exclude configuration changes. This may involve assigning a custom role with limited access based on your needs.
* Enable Configuration Lock (if available):
* Some versions of iDRAC offer a Configuration Lock feature, which prevents any configuration changes until the lock is removed by an administrator.
* Navigate to Configuration > System Security or User Authentication, depending on the version, and enable the Configuration Lock option.
* Set Up Two-Factor Authentication (Optional):
* For added security, enable Two-Factor Authentication under iDRAC Settings > Network or Security settings. This step ensures only authorized users can access and make changes to the iDRAC UI.
* Save and Apply Security Changes:
* After setting up the desired restrictions and permissions, save the settings to apply the changes.
* Verify that junior IT staff accounts now have restricted access and cannot make configuration changes.
* Log Out and Test the Changes:
* Log out of the administrator account and log in with a junior IT staff account to confirm that the permissions are set correctly.
* Ensure that configuration changes are disabled and that the user can only view the iDRAC interface as per the restrictions.
By following these steps, you can restrict junior IT staff from making any configuration changes within the iDRAC interface, thus preventing accidental or unauthorized modifications.

NEW QUESTION 31
What is indicated when the Mid-Bay hard drive LED indicator is solid amber?

Hard Drive has been removed.

Hard Drive temperature is normal.

Hard Drive has lost connectivity with the PERC.

Hard Drive has entered a predictive failure status.

Understanding Hard Drive LED Indicators in Dell PowerEdge Servers
Server Troubleshooting (32%)
* Analyze the visual indicators on server components – system ID, PSU, and BLINK Overview Dell PowerEdge servers utilize LED indicators on hard drive carriers to provide immediate visual feedback on the status of the drives. These indicators are essential for quick diagnostics and troubleshooting.
Hard Drive LED Indicator Meanings
Typically, the hard drive carrier has two LEDs:
* Activity LED (Green): Indicates drive activity (read/write operations).
* Status LED (Green/Amber): Indicates the status of the drive.
Status LED Colors and Patterns
* Off: Drive is not present or powered off.
* Solid Green: Drive is online and functioning normally.
* Blinking Green: Drive is being accessed or undergoing initialization.
* Blinking Amber: Drive has entered a predictive failure state (SMART alerts).
* Solid Amber: Drive has failed or lost connectivity.
Analyzing the Scenario
* Solid Amber LED on Mid-Bay Hard Drive: This indicates a critical issue with the drive.
Explanation of Options
* Option A: Hard Drive has been removed
* Analysis: If the drive is removed, the status LED would be off because there is no power to the drive.
* Conclusion: Incorrect.
* Option B: Hard Drive temperature is normal
* Analysis: A normal temperature would not trigger an amber LED. Temperature warnings are usually indicated by system alerts or different LED patterns.
* Conclusion: Incorrect.
* Option C: Hard Drive has lost connectivity with the PERC
* Analysis: A solid amber LED often means the drive is not communicating with the RAID controller (PERC). This could be due to a failed drive or a connectivity issue.
* Conclusion: Correct Answer.
* Option D: Hard Drive has entered a predictive failure status
* Analysis: Predictive failures are typically indicated by a blinking amber LED, warning of impending drive failure.
* Conclusion: Incorrect.
Dell Operate References
* Server Troubleshooting (32%)
* Analyze the visual indicators on server components: Understanding LED indicators is crucial for diagnosing hardware issues promptly.
* Server Components (26%)
* Define storage options, Drives, PERC: Knowledge of drive statuses and RAID controller interactions aids in accurate troubleshooting.
Conclusion
A solid amber LED on the hard drive indicates that the drive has failed or lost connectivity with the PERC controller. This status requires immediate attention to replace the drive or resolve the connectivity issue to prevent data loss.

NEW QUESTION 32
What are two requirements for using the iDRACS Quick Sync feature? (Choose two.)

Bluetooth connectivity

Type A/A USB cable

OpenManage Mobile app

NFC enabled mobile device

NEW QUESTION 33
A technician creates two virtual disks, Vdisk1 and Vdisk2, and assigns a dedicated hot spare for Vdisk1. A drive fails on Vdisk2.
What is the result?

Rebuild operation occurs in Vdisk2.

Dedicated hot spare replaces the failed disk.

Vdisk2 loses one remaining redundancy.

RLM runs for the failed disk.

NEW QUESTION 34
SPECIAL INSTRUCTIONS
The remaining Part1 questions are associated with four case studies that describe various environments or settings. Each case study appears on its own display screen. Questions for each case study will appear on separate display screens. When displaying a question, you can easily review the related case study by clicking on the ‘Review Case Study icon shown below:
Case Study 5 – Refer to the Exhibit.

Backing up data from a Dell EMC Isilon cluster exceeds the company’s backup window. Because the company has a large amount of data with a continuous high growth rate, they want to change their backup strategy. The Gen 6 Isilon cluster consists of 24 nodes.
Their current backup strategy is an NDMP three-way backup performing weekly full backups to tape and incremental backups each night. The strategy uses Dell EMC Net Worker. The DMA uses Include paths to specify what data to backup. All data on the cluster must remain accessible.
The company’s IT team is now looking for a new data protection strategy.
The company wants to:
– Minimize the backup window
– Increase the speed of data recovery
– Reduce the network traffic
– Reduce the overall growth of the backup datasets
The IT Team indicates that their currently backup hardware will be used in any solution.
Which solution meets their requirements?

Implement an incremental forever backup strategy

Configure the DMA to use IPv6 for better performance

Change the backup strategy to token-based backups

Increase the backup tape block size to 512 KB

NEW QUESTION 35
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.
What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

The Virtual Console is disabled

Operating system not installed on remote server

The server has been powered down

There are more than the maximum number of active sessions

NEW QUESTION 36
Click the Launch Simulator button.
Using the iDRAC UI, what is listed as the Cache Memory Size for the H965i storage controller?
Note: It is necessary to close (x) the simulator window before you can select a response to this question.

965 MB

8361 MB

1064 MB

8 GB

Launch the Simulator:
* Open the PowerEdge iDRAC simulator to access the user interface and perform the required task.
Navigate to System Information:
* In the top menu bar, select the “Configuration” tab.
* From the options that appear, choose “Storage”. This section will display details and configurations for the storage controllers installed on the server.
Check the H965i Storage Controller:
* Locate the H965i storage controller in the list. Selecting it should bring up a summary page with various specifications for the controller.
* Look for the field labeled “Cache Memory Size”. This will provide the cache memory size value for the controller.

NEW QUESTION 37
What is required to use the iSM Automatic System Recovery feature?

Server Administrator not installed

OS watchdog timer disabled

OS watchdog timer enabled

Server Administrator installed

NEW QUESTION 38
Match each RAID level to its characteristic.

NEW QUESTION 39
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.
What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

The Virtual Console is disabled

Operating system not installed on remote server

The server has been powered down

There are more than the maximum number of active sessions

NEW QUESTION 40
A technician is ready to deploy a server. If a critical part such as the system board fails, they must be able to replace the system board, reconfigure components, and update the firmware revisions in the fastest possible time.
How should the technician meet this requirement?

Back up the profile using the System Profile Settings

Use the iDRAC Rollback feature to restore the firmware revisions

Use the iDRAC GUI to back up the Server Profile

Back up component configurations using iSM

NEW QUESTION 41
A technician completes initial system configuration of a server. They need to set up automated, proactive support without requiring a systems management console.
Which tool does the technician need to install?

Open Manage Essentials

Open Manage Server Administrator

SupportAssist for iDRAC / Enterprise systems

Support Assist Collector

NEW QUESTION 42
Which option is a granular user privilege configurable in the iDRAC9?

Access virtual console

Readonly

Edit logs

Change dashboard view

Understanding Granular User Privileges in iDRAC9
System Administration (18%)
* Configure BIOS, Storage, virtual media, networking, user access, lockdown mode, and group management Granular User Privileges in iDRAC9
* iDRAC9provides the ability to assign specific privileges to user accounts, allowing for fine-grained control over what actions users can perform.
Explanation of Options
* Option A: Access virtual console
* Explanation: Access to the virtual console is a specific privilege that can be granted or denied to individual users in iDRAC9. This allows administrators to control who can remotely access the server’s console.
* Conclusion:Correct Answer.
* Option B: Readonly
* Explanation: The Readonly privilege is a role that allows users to view settings without making changes. It is not considered a granular privilege but a predefined user role.
* Conclusion: Not as granular as specific privileges.
* Option C: Edit logs
* Explanation: iDRAC9 does not provide a specific privilege to edit logs, as logs are critical records that should not be altered for security and auditing purposes.
* Conclusion: Incorrect.
* Option D: Change dashboard view
* Explanation: Changing the dashboard view is a user interface preference and not typically a privilege that is controlled or assigned in iDRAC9.
* Conclusion: Incorrect.
Dell Operate References
* System Administration (18%)
* Configure user access: Understanding how to assign and manage user privileges in iDRAC9.
* Server Management and Configuration Tools (14%)
* Define the function of the iDRAC, login procedures, licensing, and connection methods:
Emphasizes the importance of controlling access to management functions.
Conclusion
* Access virtual consoleis a granular user privilege configurable in iDRAC9, allowing administrators to control remote console access on a per-user basis.

NEW QUESTION 43
What is the default location of the extracted files of the OMSA installer?

C:Program FilesSystem32

C:OpenManage

C:WindowsTemp

Current directory

NEW QUESTION 44
A system board has been replaced on a Dell PowerEdge 16G server. What data can Easy Restore recover?

Service Tag

HBAconfiguration

PERC configuration

Lifecycle controller log

Understanding Easy Restore Functionality
Server Troubleshooting (32%)
* Explain Easy Restore, diagnostic utilities, and hardware diagnostic options What is Easy Restore?
* Easy Restoreis a feature in Dell PowerEdge servers that automatically restores system-specific information after a system board replacement.
* Purpose: Minimizes downtime and simplifies recovery by retaining critical system identity information.
Data Restored by Easy Restore
* Service Tag: The unique identifier (serial number) of the server.
* System Configuration Settings: Includes BIOS settings and other non-volatile configurations.
Data NOT Restored by Easy Restore
* Option B: HBA Configuration
* Host Bus Adapter settings are not restored automatically.
* Option C: PERC Configuration
* RAID configurations need to be backed up and restored separately.
* Option D: Lifecycle Controller Log
* Logs are stored on the system board and do not transfer after replacement.
Evaluation of Options
* Option A: Service Tag
* Correct answer: Easy Restore recovers the Service Tag, preserving the server’s identity.
* Option B: HBA Configuration
* Analysis: Requires manual configuration or restoration from a backup.
* Option C: PERC Configuration
* Analysis: RAID settings are critical but need separate backup and restoration procedures.
* Option D: Lifecycle Controller Log
* Analysis: Logs are not preserved after system board replacement.
Dell Operate References
* Server Troubleshooting (32%)
* Highlights the importance of understanding what Easy Restore can and cannot recover.
Conclusion
After replacing the system board on a Dell PowerEdge 16G server, Easy Restore will recover theService Tag, ensuring the server maintains its unique identity within the network and management systems.

NEW QUESTION 45
A technician needs to configure a server to PXE boot a server setup image with the BIOS in UEFI mode.
Which two steps should the technician perform to enable this function? (Choose two.)

From System Setup Utility, choose Device Settings. Configure NIC for PXE.

Navigate to Boot Options Settings and set PXE Device1 as first option.

Navigate to Network Settings, PXE Device1 Settings, and configure IP.

Boot to Ctrl+S and configure the NIC for PXE Device1.

From the iDRAC web interface, select Network Settings, and enable PXE Device1.

NEW QUESTION 46
Which tool provides automated Dell support case creation?

SupportAssist Collector

OpenManage Case Creator

OpenManage Server Administrator

SupportAssist for IDRAC / Enterprise systems

NEW QUESTION 47
A technician has a server with the following memory configuration:
– Sixteen 4 GB dual-rank DIMMs
– 8 GB available to the OS
The workload intended for the server required the memory configuration to protect against some errors.
Now the technician must deploy for a different workload that requires access to all available memory.
Which setting should the technician change to make all memory available to the system?

Mirrored

Optimizer

Performance

Sparing

NEW QUESTION 48
Which two memory settings optimize a PowerEdge 16G server to support VMware ESXi?

Near Balanced Configuration and Dell Fault Resilient Mode

Balanced Memory Configuration and Dell Fault Resilient Mode

Balanced Memory Configuration and Optimizer Mode

Near Balanced Configuration and Optimizer Mode

Optimizing Memory Settings for VMware ESXi on a Dell PowerEdge 16G Server Server Components (26%)
* Define the different processor, memory options, and memory configurations Understanding Memory Configuration Options When configuring a Dell PowerEdge 16th Generation (16G) server to support VMware ESXi, it’s crucial to optimize memory settings for performance and reliability. The two memory settings that best optimize the server for VMware ESXi are:
* Balanced Memory Configuration
* Optimizer Mode
1. Balanced Memory Configuration
* Explanation: A balanced memory configuration ensures that memory modules (DIMMs) are evenly distributed across all memory channels and CPUs. This maximizes memory bandwidth and performance by enabling the server to utilize all available memory channels effectively.
* Benefits for VMware ESXi:
* Improved Performance: Balanced configurations reduce memory latency and increase throughput, which is essential for virtualization workloads.
* Enhanced Stability: Ensures consistent performance across virtual machines (VMs) by preventing memory bottlenecks.
Dell Operate Reference:
* Server Components (26%): Emphasizes the importance of memory configurations and their impact on server performance.
2. Optimizer Mode
* Explanation: Optimizer Mode is a BIOS setting that configures the memory for optimal performance.
It arranges the memory in a way that prioritizes speed and efficiency, typically by disabling features like memory mirroring or sparing that can reduce performance.
* Benefits for VMware ESXi:
* Maximum Memory Performance: Optimizer Mode allows the server to achieve the highest possible memory speeds.
* Ideal for Virtualization: VMware ESXi benefits from fast memory access, which improves VM performance and responsiveness.
Dell Operate Reference:
* System Administration (18%): Configuring BIOS settings is critical for optimizing server operations, particularly for specific workloads like virtualization.
Why the Other Options Are Less Optimal
* Near Balanced Configuration:
* Explanation: This configuration is close to balanced but may have slight imbalances due to uneven DIMM distribution.
* Impact: Can lead to suboptimal performance compared to a fully balanced configuration.
* Dell Fault Resilient Mode:
* Explanation: A memory mode that reserves a portion of memory for critical applications to protect against memory errors.
* Impact: Reduces available memory for VMs and can decrease overall performance, which is not ideal for VMware ESXi environments that require maximum memory resources.
Conclusion
For optimizing a Dell PowerEdge 16G server to support VMware ESXi, selecting Balanced Memory Configuration and Optimizer Mode ensures the best performance and resource utilization. These settings maximize memory bandwidth and speed, which are critical for virtualization workloads.
Topic 1, PowerEdge Test Simulator
You will need to use the PowerEdge Simulator to correctly answer questions in Part 2. The simulator allows you to navigate through the PowerEdge interface and configure many items. You will be scored on your ability to perform tasks, configure items, and gather information within the simulated environment.

Loading …