This page was exported from Latest Exam Prep [ http://certify.vceprep.com ] Export date:Sat Dec 14 10:40:09 2024 / +0000 GMT ___________________________________________________ Title: [Oct 16, 2024] HPE6-A73 Exam Brain Dumps - Study Notes and Theory [Q48-Q70] --------------------------------------------------- [Oct 16, 2024] HPE6-A73 Exam Brain Dumps - Study Notes and Theory Pass HP HPE6-A73 Test Practice Test Questions Exam Dumps QUESTION 48A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of “Unknown”.What is the cause of this issue?  The administrator does not have the appropriate credentials to interact with NAE  The number of scripts or agents has exceeded the hardware’s capabilities  A connectivity issue exists between NAE and the AOS-CX switch  The RESTful API has not been enabled on the AOS-CX switch https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7717/Content/Chp_TS/err-nae-age-not-cre-db-con-vio-err.htmQUESTION 49A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8 4 code The solution leverages a third-party AAA solution. The company is replacing existing access switches with AOS-CX 6300 and 6400 switches The company wants to leverage the same security and firewall policies for both wired and wireless traffic.Which solution should the company implement?  IPSec  Downloadable user roles  RADIUS dynamic authorization  User-based tunneling QUESTION 50Examine the VSX-related configuration of the core layer AOS-CX switch:A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.Which configuration should the administrator add to the core switch to fix this issue?  ICX-Tx-Core1(config)# vsxICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00  ICX-Tx-Core1(config)# interface lag 1 multi-chassisICX-Tx-Core1(config-if-lag-if)# mtu 9198  ICX-Tx-Core1(config)# interface 1/1/46-1/1/47ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00  ICX-Tx-Core1(config)# interface 1/1/45ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00 QUESTION 51Examine the attached diagramTwo AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.What is correct about access from the servers to the Core?  Server 2 can successfully access the core layer via the keepalive link.  Server 1 and Server 2 can communicate with each other via the core layer.  Server 2 cannot access the core layer.  Server 1 can access the core layer via both uplinks. QUESTION 52A company is implementing a new wireless design and needs it to support high availability, even during times of switch system upgrades. The solution will involve Aruba Mobility Controller (MC) and Aruba AP connections requiring POE. Which campus AOS-CX switch solution and virtual switching should the company implement at the campus access layer?  AOS-CX 6400 and VSX  AOS-CX 6300 and VSF  AOS-CX 8325 and VSF  AOS-CX 8400 and VSX only 6400 support highly available during upgradesQUESTION 53An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.What would best meet the administrator’s needs when deploying AOS-CX switches?  VSF  Dynamic segmentation  VSX  NAE QUESTION 54Examine the network topology.The network is configured for OSPF with the following attributes:Here is the OSPF configuration performed on Core1:Based on the above information, what is correct?  ISP 1 is not reachable from any area.  Corel has received one type 5 LSA from the ASBR.  Area 0 has 81 routes  Area 1 has 23 routes QUESTION 55A network engineer is having a problem adding a custom-written script to an AOS-CX switch’s NAE GUI.The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:What should the engineer perform to fix this issue?  Install the script’s signature before installing the new script  Ensure the engineer’s desktop and the AOS-CX switch are synchronized to the same NTP server  Enable trust settings for the AOS-CX switch’s SSL certificate  Remove a script that is no longer used before installing the new script QUESTION 56Examine the configuration performed on newly deployed AOS-CX switches;After performing this configuration the administrator notices that the switch ports always remain in the EAP-start state. What should the administrator do to fix this problem?  Enable change of authorization (CoA)  Create and assign a local user role to the ports.  Set the ports to client-mode.  Define the server group cppm QUESTION 57An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?  IP protocol 50 and UDP 8209  UDP 4500 and IP protocol 47  UDP 8211 and IP protocol 47  UDP 4500 and UDP 8209 ACSP Study Guide Page 788 – Allow the following protocols/ports– PAPI: UDP 8211– GRE: Protocoll 47QUESTION 58An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.Which statement is correct about this situation?  802.1X must be configured to work in fallback mode  Device fingerprinting is required for authentication  The client-limit setting for port access needs to be changed  Device mode should be implemented QUESTION 59When an AOS-CX switch uses a temporary copy of the Configuration State database, what kind of analysis does NetEdit perform to ensure that the configuration is correct?  Syntax validation  Semantic validation  Conformance validation  Change validation Validation processes+ Syntax validation– When: while typing– What: command syntax including in-line help+ Semantics validation– When: VALIDATE button (in multi-editor) or before DEPLOY– What: configuration consistency+ Conformance validation– When: while editing– What: compliance with conformance rules: corporate policies, minimum connectivity requirements, etc.+ Change validation– When: during DEPLOY (before and after configuration deployment)– What: compares device state before and after changes are applied (using show commands)QUESTION 60Examine the network exhibit.A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?  OSPF route maps using the “set metric” command  Policy-based routing (PBR)  User-based tunneling (UBT)  Classifier policies QUESTION 61What is correct regarding the configuration of ACLs on AOS-CX switches?  Statements with the log keyword are always processed by the switch CPU.  Standard ACLs are used to match on routes when performing route distribution.  Wildcard masks are used to match on a range of IP addresses.  Numbers 100 through 199 and 2000 through 2999 are used when creating extended ACLs. QUESTION 62An administrator will be deploying HPE Aruba Networking Switch Multi-Edit Software to manage an Aruba solution. What does Switch Multi-Edit Software support?  Manages AOS-CX switches and HPE Aruba Networking Gateways  Tracks configuration and hardware information  Support for HPE Aruba Networking-supplied security updates  Can be purchased as a VM and/or hardware appliance QUESTION 63The network is configured for OSPF with the following attributes:Core1 and Core2 and ABRsArea 1 has 20 networks in the 10.1.0.0/16 rangeArea 0 has 10 networks in the 10.0.0.0/16 rangeArea 2 has 50 networks in the 10.2.0.0/16 rangeThe ASBR is importing a static route into Area 1Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:Based on the above information, what is correct?  Area 0 has 13 routes  Core1 has no OSPF routes  Core1 has received one LSA Type 5 from the ASBR  Area 1 has 23 routes QUESTION 64Examine the configuration performed on newly deployed AOS-CX switches:After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?  Define the server group cppm  Set the ports to client-mode  Create and assign a local user role to the ports  Enable change of authorization (CoA) https://community.arubanetworks.com/blogs/esupport1/2020/04/29/downloadable-user-role-configuration-in-aruba-os-cx-with-mac-authenticationQUESTION 65An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.What is the best way for the administrator to accomplish this?  Create a route map with the correct route type and metrics  Define the route type and metrics in the OSPF process  Create a classifier policy with the correct route type and metrics  Define a class and policy map with the correct route type and metrics QUESTION 66A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.What should the administrator do to fix this problem?  Verify that IGMP is enabled between the switches connecting the multicast source and receivers  Change the destination multicast address to 239.1.1.1  Define the 239.0.0.1 stream on the rendezvous point (RP)  Define the 239.0.0.1 stream on the PIM candidate bootstrap router MAC/IP overlap. 239.0.0.1 would be the same MAC for 224.0.0.1. 224.0.0.0/24 is always flooded over every port.QUESTION 67What is correct regarding the tunneling of user traffic between AOS-CX switches and Aruba Mobility Controllers (MCs)?  Uses IPSec to protect the management and data traffic  Uses IPSec to protect the management traffic  Supports only port-based tunneling  Uses the same management protocol as Aruba APs because both AP and Switch use PAPI . Moreover in AOS-CX switch currently not support port based tunnel. AOS-CX switch only support User Based Tunnel (UBT)QUESTION 68An administrator wants to leverage always-on PoE on AOS-CX switches. Which statement is correct regarding this feature’?  Supports all AOS-CX switches  Requires NetEdit to implement  Provides up to 60W of power per port  Provides surge protection for PoE and non-PoE ports QUESTION 69Which protocols are used by NetEdit to interact with third-party devices? (Choose two.)  telnet  SNMP  SSH  Restful API  CDP QUESTION 70When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?  <ESC>  “>”  Space  Tab  Loading … Verified HPE6-A73 dumps Q&As - HPE6-A73 dumps with Correct Answers: https://www.vceprep.com/HPE6-A73-latest-vce-prep.html --------------------------------------------------- Images: https://certify.vceprep.com/wp-content/plugins/watu/loading.gif https://certify.vceprep.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-10-16 12:59:06 Post date GMT: 2024-10-16 12:59:06 Post modified date: 2024-10-16 12:59:06 Post modified date GMT: 2024-10-16 12:59:06