Pass CrowdStrike CCFA-200 PDF Dumps Recently Updated 152 Questions [Q19-Q36]

October 12, 2024 admin 0

Categories : CCFA-200 , CrowdStrike

Rate this post

Pass CrowdStrike CCFA-200 PDF Dumps | Recently Updated 152 Questions

Updated Test Engine to Practice CCFA-200 Dumps & Practice Exam

The CCFA-200 exam is a valuable certification for cybersecurity professionals who are looking to advance their careers. It demonstrates the candidate’s expertise in one of the leading endpoint protection platforms and provides a competitive advantage in the job market. CrowdStrike Certified Falcon Administrator certification also provides access to CrowdStrike’s community of certified professionals, which offers networking opportunities and access to exclusive resources.

CrowdStrike CCFA-200 (CrowdStrike Certified Falcon Administrator) Certification Exam is a rigorous certification program that is designed to test the knowledge and skills of IT professionals in the field of cybersecurity. CrowdStrike Certified Falcon Administrator certification is aimed at individuals who are responsible for the administration and management of the CrowdStrike Falcon platform, which is a cloud-based endpoint protection solution that provides advanced threat protection to organizations of all sizes.

QUESTION 19
When the Notify End Users policy setting is turned on, which of the following is TRUE?

End users will not be notified as we would not want to notify a malicious actor of a detection. This setting does not exist

End users will be immediately notified via a pop-up that their machine is in-network isolation

End-users receive a pop-up notification when a prevention action occurs

End users will receive a pop-up allowing them to confirm or refuse a pending quarantine

QUESTION 20
The Falcon sensor uses certificate pinning to defend against man-in-the-middle attacks. Which statement is TRUE concerning Falcon sensor certificate validation?

SSL inspection should be configured to occur on all Falcon traffic

Some network configurations, such as deep packet inspection, interfere with certificate validation

HTTPS interception should be enabled to proceed with certificate validation

Common sources of interference with certificate pinning include protocol race conditions and resource contention

Explanation
The statement that some network configurations, such as deep packet inspection, interfere with certificate validation is true concerning Falcon sensor certificate validation. The Falcon sensor uses certificate pinning to defend against man-in-the-middle attacks, which means that it verifies that the server certificate presented by the Falcon cloud matches a hard-coded certificate embedded in the sensor. Some network configurations, such as deep packet inspection, SSL inspection, or HTTPS interception, may attempt to modify or replace the server certificate, which will cause the sensor to reject the connection and generate an error3.
References: 3: How to Become a CrowdStrike Certified Falcon Administrator

QUESTION 21
What should be disabled on firewalls so that the sensor’s man-in-the-middle attack protection works properly?

Deep packet inspection

Linux Sub-System

PowerShell

Windows Proxy

Explanation
The option that should be disabled on firewalls so that the sensor’s man-in-the-middle attack protection works properly is deep packet inspection. Deep packet inspection is a network configuration that inspects and modifies the data packets that pass through a firewall. Deep packet inspection may interfere with the sensor’s certificate validation, which is a feature that verifies that the server certificate presented by the Falcon cloud matches a hard-coded certificate embedded in the sensor. If the certificate validation fails, the sensor will reject the connection and generate an error3.
References: 3: How to Become a CrowdStrike Certified Falcon Administrator

QUESTION 22
An analyst has reported they are not receiving workflow triggered notifications in the past few days. Where should you first check for potential failures?

Custom Alert History

Workflow Execution log

Workflow Audit log

Falcon UI Audit Trail

QUESTION 23
Which of the following applies to Custom Blocking Prevention Policy settings?

Hashes must be entered on the Prevention Hashes page before they can be blocked via this policy

Blocklisting applies to hashes, IP addresses, and domains

Executions blocked via hash blocklist may have partially executed prior to hash calculation process remediation may be necessary

You can only blocklist hashes via the API

QUESTION 24
Which port and protocol does the sensor use to communicate with the CrowdStrike Cloud?

TCP port 22 (SSH)

TCP port 443 (HTTPS)

TCP port 80 (HTTP)

TCP UDP port 53 (DNS)

Explanation
The sensor uses TCP port 443 (HTTPS) to communicate with the CrowdStrike Cloud. This port and protocol are used to securely send and receive data between the sensor and the cloud, such as detections, policies, updates, commands, etc. The other options are either incorrect or not used by the sensor.
Reference: CrowdStrike Falcon User Guide, page 28.

QUESTION 25
Under which scenario can Sensor Tags be assigned?

While triaging a detection

While managing hosts in the Falcon console

While updating a sensor in the Falcon console

While installing a sensor

QUESTION 26
What will happen to a host if it is not assigned a Sensor Update policy?

The host will uninstall the Sensor and provide an alert to the installation team

The host will automatically update to the newest sensor version and auto-update to future release

The host will automatically create a custom Sensor Update policy

The host will use the Default Sensor Update policy

Explanation
The option that describes what will happen to a host if it is not assigned a Sensor Update policy is that the host will use the Default Sensor Update policy. A Sensor Update policy is a policy that controls how and when the Falcon sensor is updated on a host. You can create and assign custom Sensor Update policies to different hosts or groups in your environment. However, if a host is not assigned to a specific Sensor Update policy, it will inherit the settings from the Default Sensor Update policy. The Default Sensor Update policy is a “catch-all” policy that is enabled by default and has the “Uninstall and Maintenance Protection” feature turned on. You can modify the settings of the Default Sensor Update policy, but you cannot delete or disable it1.
References: 1: Falcon Administrator Learning Path | Infographic | CrowdStrike

QUESTION 27
How can you find a list of hosts that have not communicated with the CrowdStrike Cloud in the last 30 days?

Under Dashboards and reports, choose the Sensor Report. Set the “Last Seen” dropdown to 30 days and reference the Inactive Sensors widget

Under Host setup and management, choose the Host Management page. Set the group filter to “Inactive Sensors”

Under Host setup and management > Managed endpoints > Inactive Sensors. Change the time range to 30 days

Under Host setup and management, choose the Disabled Sensors Report. Change the time range to 30 days

QUESTION 28
Which role will allow someone to manage quarantine files?

Falcon Security Lead

Detections Exceptions Manager

Falcon Analyst – Read Only

Endpoint Manager

QUESTION 29
Why do Sensor Update policies need to be configured for each OS (Windows, Mac, Linux)?

To bundle the Sensor and Prevention policies together into a deployment package

Sensor Update policies are OS dependent

To assist with auditing and change management

This is false. One policy can be applied to all Operating Systems

Explanation
Sensor Update policies need to be configured for each OS (Windows, Mac, Linux) because Sensor Update policies are OS dependent. A Sensor Update policy is a policy that controls how and when the Falcon sensor is updated on a host. Sensor Update policies are specific to each operating system type, as different operating systems have different sensor versions, features, and requirements. Therefore, you need to create and assign separate Sensor Update policies for each operating system type in your environment1.
References: 1: Falcon Administrator Learning Path | Infographic | CrowdStrike

QUESTION 30
Where can you modify settings to permit certain traffic during a containment period?

Prevention Policy

Host Settings

Containment Policy

Firewall Settings

Explanation
The administrator can modify settings to permit certain traffic during a containment period by creating or editing a Containment Policy. This policy allows users to specify which ports, protocols and IP addresses are allowed or blocked during network containment. The other options are either incorrect or not related to network containment. Reference: [CrowdStrike Falcon User Guide], page 40.

QUESTION 31
Why is it critical to have separate sensor update policies for Windows/Mac/*nix?

There may be special considerations for each OS

To assist with testing and tracking sensor rollouts

The network protocols are different for each host OS

It is an auditing requirement

QUESTION 32
The Logon Activities Report includes all of the following information for a particular user EXCEPT __________.

the account type for the user (e.g. Domain Administrator, Local User)

all hosts the user logged into

the logon type (e.g. interactive, service)

the last time the user’s password was set

QUESTION 33
You have created a Sensor Update Policy for the Mac platform. Which other operating system(s) will this policy manage?

*nix

Windows

Both Windows and *nix

Only Mac

QUESTION 34
What best describes what happens to detections in the console after clicking “Enable Detections” for a host which previously had its detections disabled?

Enables custom detections for the host

New detections will start appearing in the console, and all retroactive stored detections will be restored to the console for that host

New detections will start appearing in the console immediately. Previous detections will not be restored to the console for that host

Preventions will be enabled for the host

Explanation
The option that best describes what happens to detections in the console after clicking “Enable Detections” for a host which previously had its detections disabled is that new detections will start appearing in the console immediately. Previous detections will not be restored to the console for that host. The “Enable Detections” feature allows you to enable or disable the detection and prevention capabilities of the Falcon sensor on a specific host. When you disable detections for a host, the sensor will stop sending any detection or prevention events to the Falcon console, and any existing events for that host will be removed from the console. When you enable detections for a host, the sensor will resume sending any new detection or prevention events to the Falcon console, but any previous events for that host will not be restored to the console1.
References: 1: Falcon Administrator Learning Path | Infographic | CrowdStrike

QUESTION 35
When creating new IOCs in IOC management, which of the following fields must be configured?

Hash, Description, Filename

Hash, Action and Expiry Date

Filename, Severity and Expiry Date

Hash, Platform and Action

QUESTION 36
With Custom Alerts, it is possible to __________.

schedule the alert to run at any interval

receive an alert in an email

configure prevention actions for alerting

be alerted to activity in real-time

Loading …