This page was exported from Latest Exam Prep [ http://certify.vceprep.com ] Export date:Sat Dec 14 10:01:04 2024 / +0000 GMT ___________________________________________________ Title: New VCEPrep 100-101 Exam Questions Real 100-101 Dumps Updated on Jun 24, 2023 [Q28-Q45] --------------------------------------------------- New VCEPrep 100-101 Exam Questions| Real 100-101 Dumps Updated on Jun 24, 2023 100-101 Braindumps – 100-101 Questions to Get Better Grades QUESTION 28Which two targeting features are available at the Ad Set level? (Choose 2)  Placements  Optimizations  Bid Strategy  Target Audience QUESTION 29Which characteristics are representative of a link-state routing protocol? (Choose three.)  provides common view of entire topology  exchanges routing tables with neighbors  calculates shortest path  utilizes event-triggered updates  utilizes frequent periodic updates Each of routers running link-state routing protocol learns paths to all the destinations in its“area” so we can say although it is a bit unclear.Link-state routing protocols generate routing updates only (not the whole routing table)when a change occurs in the network topology soLink-state routing protocol like OSPF uses Dijkstra algorithm to calculate the shortest path –> .Unlike Distance vector routing protocol (which utilizes frequent periodic updates), link-staterouting protocol utilizes event-triggered updates (only sends update when a change occurs)->QUESTION 30How does TCP differ from UDP? (Choose two.)  TCP provides best effort delivery.  TCP provides synchronized communication.  TCP segments are essentially datagrams.  TCP provides sequence numbering of packets.  TCP uses broadcast delivery. TCP differs from UDP in the following ways:TCP provides best effort delivery.TCP provides synchronized communication.TCP segments are essentially datagrams.TCP provides sequence numbering of packets.TCP uses broadcast delivery.QUESTION 31After years of advertising on TV, a branding advertiser wants to start running ads on the Facebook App. The advertiser has a TV ad with an emotional message to connect the brand with customers The TV ad lasts 30 seconds.What is the best creative approach to run this campaign?  Create a 15-second video ad with the content used on TV  Create a 20 second video ad with a shorter version of the content used on TV  Create a 15-second video ad that is vertical with the content used on TV  Create a video ad with the content used on TV QUESTION 32What is the bandwidth on the WAN interface of Router 1?  16 Kbit/sec  32 Kbit/sec  64 Kbit/sec  128 Kbit/sec  512 Kbit/sec  1544 Kbit/sec Use the “show interface s0/0” to see the bandwidth set at 16Kbit/sec.QUESTION 33Refer to the exhibit.Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?  10.1.1.2  10.154.154.1  172.16.5.1  192.168.5.3 The highest IP address of all loopback interfaces will be chosen -> Loopback 0 will be chosen as the router ID.QUESTION 34How does TCP differ from UDP? (Choose two.)  TCP provides best effort delivery.  TCP provides synchronized communication.  TCP segments are essentially datagrams.  TCP provides sequence numbering of packets.  TCP uses broadcast delivery. QUESTION 35Refer to the exhibit.A technician pastes the configurations in the exhibit into the two new routers shown. Otherwise, the routers are configured with their default configurations.A ping from Host1 to Host 2 fails, but the technician is able to ping the S0/0 interface of R2 from Host 1. The configurations of the hosts have been verified as correct. What could be the cause of the problem?  The serial cable on R1 needs to be replaced.  The interfaces on R2 are not configured properly  R1 has no route to the 192.168.1.128 network.  The IP addressing scheme has overlapping subnetworks.  The ip subnet-zero command must be configured on both routers. Explanation/Reference:Without a static route pointing to host 2 network the router is unaware of the path to take toreach that network and reply traffic cannot be sent.QUESTION 36Refer to the exhibit.When running OSPF, what would cause router A not to form an adjacency with router B?  The loopback addresses are on different subnets.  The values of the dead timers on the routers are different.  Route summarization is enabled on both routers.  The process identifier on router A is different than the process identifier on router B. Explanation/Reference:To form an adjacency (become neighbor), router A & B must have the same Hello interval,Dead interval and AREA numbersQUESTION 37Refer to the exhibit.Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?  10.1.1.2  10.154.154.1  172.16.5.1  192.168.5.3 Explanation The highest IP address of all loopback interfaces will be chosen -> Loopback 0 will be chosen as the router ID.QUESTION 38After setting up an ads account in Ads Manager, what must an advertiser have before implementing a Meta pixel?  Instagram business account  Phone number  FacebookApp Shops  Website QUESTION 39Why do large OSPF networks use a hierarchical design? (Choose three.)  to decrease latency by increasing bandwidth  to reduce routing overhead  to speed up convergence  to confine network instability to single areas of the network  to reduce the complexity of router configuration  to lower costs by replacing routers with distribution layer switches OSPF implements a two-tier hierarchical routing model that uses a core or backbone tier known as area zero (0). Attached to that backbone via area border routers (ABRs) are a number of secondary tier areas. The hierarchical approach is used to achieve the following:Rapid convergence because of link and/or switch failuresDeterministic traffic recoveryScalable and manageable routing hierarchy, reduced routing overhead.QUESTION 40What is the purpose of assigning an IP address to a switch?  provides local hosts with a default gateway address  allows remote management of the switch  allows the switch to respond to ARP requests between two hosts  ensures that hosts on the same LAN can communicate with each other Switch is a layer 2 device and doesn’t use network layer for packet forwarding. The IP address may be used only for administrative purposes such as Telnet access or for network management purposes.Topic 4, IP Routing TechnologiesQUESTION 41Refer to the exhibit.Which default gateway address should be assigned to HostA?  192.168.1.1  192.168.1.65  192.168.1.66  192.168.1.129  10.1.1.1  10.1.1.2 Explanation/Reference:It should be one less than the switch IP to which it is connected so it will be B.QUESTION 42What does a host on an Ethernet network do when it is creating a frame and it does not have the destination address?  drops the frame  sends out a Layer 3 broadcast message  sends a message to the router requesting the address  sends out an ARP request with the destination IP address In this case, it will send out an ARP request for MAC address of the destination IP (assuming it doesn’t already have it in its table) and then address it to the destination’s MAC address.QUESTION 43Which layer of the TCP/IP stack combines the OSI model physical and data link layers?  Internet layer  transport layer  application layer  network access layer Explanation/Reference: The Internet Protocol Suite, TCP/IP, is a suite of protocols used for communication over the internet. The TCP/ IP model was created after the OSI 7 layer model for two major reasons. First, the foundation of the Internet was built using the TCP/IP suite and through the spread of the World Wide Web and Internet, TCP/IP has been preferred. Second, a project researched by the Department of Defense (DOD) consisted of creating the TCP/IP protocols. The DOD’s goal was to bring international standards which could not be met by the OSI model. Since the DOD was the largest software consumer and they preferred the TCP/IP suite, most vendors used this model rather then the OSI. Below is a side by side comparison of the TCP/IP and OSI models.QUESTION 44The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router.Which routers are likely to have been elected as DR? (Choose two.)  Corp-1  Corp-2  Corp-3  Corp-4  Branch-1  Branch-2 There are 2 segments on the topology above which are separated by Corp-3 router. Eachsegment will have a DR so we have 2 DRs.To select which router will become DR they will compare their router-IDs. The router with highest(best) router-ID will become DR. The router-ID is chosen in the order below:+The highest IP address assigned to a loopback (logical) interface.+If a loopback interface is not defined, the highest IP address of all active router’s physical interfaces will be chosen.In this question, the IP addresses of loopback interfaces are not mentioned so we will consider IP addresses of all active router’s physical interfaces. Router Corp-4 (10.1.40.40) & Branch-2(10.2.20.20) have highest “active” IP addresses so they will become DRs.QUESTION 45Refer to the exhibit.The network administrator made the entries that are shown and then saved the configuration. From a console connection, what password or password sequence is required for the administrator to access privileged mode on Router1?  cisco  sanfran  sanjose  either cisco or sanfran  either cisco or sanjose  sanjose and sanfran The enable secret password takes precedence over the enable password, so sanfran will be used. Loading … Facebook 100-101 Exam Syllabus Topics: TopicDetailsTopic 1Determine the relationship between budget and estimated results Explain the process to set up an ad accountTopic 2Explain the importance of matching business goals to Meta campaign objectives Determine the Meta campaign objective to achieve business goalsTopic 3Identify the steps to establish a business presence on Facebook and Instagram Given a scenario, determine the appropriate ad formatsTopic 4Identify how Meta protects user data privacy and common ad policies Identify mobile creative best practicesTopic 5Identify settings available at the campaign, ad set, and ad level Identify the difference between an ad and a page post   100-101 Exam Dumps - Try Best 100-101 Exam Questions: https://www.vceprep.com/100-101-latest-vce-prep.html --------------------------------------------------- Images: https://certify.vceprep.com/wp-content/plugins/watu/loading.gif https://certify.vceprep.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-06-24 12:54:32 Post date GMT: 2023-06-24 12:54:32 Post modified date: 2023-06-24 12:54:32 Post modified date GMT: 2023-06-24 12:54:32