This page was exported from Latest Exam Prep [ http://certify.vceprep.com ] Export date:Sat Sep 21 14:08:43 2024 / +0000 GMT ___________________________________________________ Title: Latest [Mar 07, 2023] Cisco 300-430 Real Exam Dumps PDF [Q74-Q92] --------------------------------------------------- Latest [Mar 07, 2023] Cisco 300-430 Real Exam Dumps PDF 300-430 Practice Test Questions Updated 160 Questions Q74. Which statement about the VideoStream/Multicast Direct feature is true?  IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.  Each VideoStream client acknowledges receiving a video IP multicast stream.  It converts the unicast frame to a multicast frame over the air.  It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet. Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/ multicast_broadcast_setup.htmlQ75. An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?  multicast  static IP  fast roaming  mDNS Explanationhttps://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.htmlQ76. An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?  analytics  connect and engage  presence  detect and locate. Q77. Which two events are outcomes of a successful RF jamming attack? (Choose two.)  disruption of WLAN services  unauthentication association  deauthentication broadcast  deauthentication multicast  physical damage to AP hardware Q78. A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.Which solution must the engineer choose?  Configure a second WLC to support half of the APs in the deployment.  Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.  Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.  Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the5.0-GHz band. Q79. A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?  MAC authentication bypass  native supplicant provisioning  local web auth  self-registration guest portal Q80. An engineer is setting up a WLAN to work with a Cisco ISE as the AAA server. The company policy requires that all users be denied access to any resources until they pass the validation. Which component must be configured to achieve this stipulation?  preauthentication ACL  WPA2 passkey  AAA override  CPU ACL Q81. What must be configured on ISE version 2.1 BYOD when using Single SSID?  no authentication  WPA2  open authentication  802.1x Explanationhttps://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configurationQ82. Refer to the exhibit.An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)  Configure the certificate, WLAN, and radio interface on WGB.  Configure the certificate on the WLC.  Configure WLAN to authenticate using ISE.  Configure the access point with the root certificate from ISE.  Configure WGB as a network device in ISE.  Configure a policy on ISE to allow devices to connect that validate the certificate.https://mrncciew.com/2018/05/25/wgb-with-peap/ Q83. An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)  X, Y real location  client description  AP name  client MAC address  WLC IP address https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/88/b_ap_4800_hyperlocation_deployment_guide.htmlQ84. Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)  Synchronize access points with the MSE.  Add the MSE to Cisco Prime Infrastructure using the CLI credentials.  Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.  Apply a valid license for Wireless Intrusion Prevention System.  Apply a valid license for location tracking. Explanationhttps://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/33/user/guide/bk_CiscoPrimeInfrastructurQ85. An engineer must implement a BYDD policy with these requirements:* Onboarding unknown machines* Easily scalable* Low overhead on the wireless network Which method satisfies these requirements?  triple SSID  open SSID  dual SSID  single SSID Explanationhttps://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_DesigQ86. When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a FlexConnect group named BranchA-FCG?  config flexconnect BranchA-FCG vlan 30 add  config flexconnect group BranchA-FCG vlan add 30  config flexconnect group BranchA-FCG vlan 30 add  config flexconnect BranchA-FCG vlan add 30 Q87. Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?  Enable IGMPv3 on the central Layer 3 switch.  Enable multicast mode on the WLC  Create multicast groups on the central Layer 3 switch.  Enable IGMP snooping on the WLC https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01011.htmlQ88. A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?  Configure a second WLC to support half of the APs in the deployment.  Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.  Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.  Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band. Q89. An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address. Which command should be used to reconcile this?  config network ap-discovery nap-ip-only enable  config flexconnect office-extend nat-ip-only disable  config flexconnect office-extend nat-ip-only enable  config network ap-discovery nat-ip-only disable https://community.cisco.com/t5/wireless/office-extend-ap-and-external-addresses/td-p/3742395Q90. A corporation is spread across different countries and uses MPLS to connect the offices. The senior management wants to utilize the wireless network for all the employees. To ensure strong connectivity and minimize delays, an engineer needs to control the amount of traffic that is traversing between the APs and the central WLC. Which configuration should be used to accomplish this goal?  FlexConnect mode with OfficeExtend enabled  FlexConnect mode with local authentication  FlexConned mode with central switching enabled  FlexConnect mode with central authentication Explanationhttps://www.cisco.com/c/en/us/td/docs/wireless/controller/72/configuration/guide/cg/cg_flexconnect.html#wp12Q91. The security policy mandates that only controller web management traffic is allowed from the IT subnet. In testing, an engineer is trying to connect to a WLAN with Web Authentication for guest users, but the page is timing out on the wireless client browser. What is the cause of this issue?  Web Authentication Redirect is supported only with Internet Explorer, and the client is using Google Chrome.  The DNS server that is configured on the controller is incorrect  Web Authentication Redirect is not supported with CPUACLS. QUE  The implemented CPU ACL on the controller is blocking HTTP/HTTPS traffic from the guest clients. Q92. Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?  Cisco Hyperlocation Module  Wireless Intrusion Prevention System  Cisco Connected Mobile Experiences  Cisco Mobility Services Engine  Loading … Cisco 300-430 Dumps - Secret To Pass in First Attempt: https://www.vceprep.com/300-430-latest-vce-prep.html --------------------------------------------------- Images: https://certify.vceprep.com/wp-content/plugins/watu/loading.gif https://certify.vceprep.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-03-07 12:12:02 Post date GMT: 2023-03-07 12:12:02 Post modified date: 2023-03-07 12:12:02 Post modified date GMT: 2023-03-07 12:12:02