This page was exported from Latest Exam Prep [ http://certify.vceprep.com ] Export date:Sat Sep 21 11:44:34 2024 / +0000 GMT ___________________________________________________ Title: GB0-381-ENU Dumps - Grab Out For [NEW-2022] H3C Exam [Q168-Q186] --------------------------------------------------- GB0-381-ENU Dumps - Grab Out For [NEW-2022] H3C Exam GB0-381-ENU Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions NEW QUESTION 168The RIP protocol is enabled on a router with a priority of 10; the OSPF protocol is also enabled with a priority of 100. If two protocols have learned the route 10.0.0.0/8 at the same time, the metric values are 1 (hop count) and 100 (cost value), and the next hop is 1.0.0.1 and 1.0.0.2 respectively.After the router receives a packet with a destination address of 10.0.0.1, how to deal with it?  Forward to 1.0.0.1  Forward to 1.0.0.2  Forward to 1.0.0.1 and 1.0.0.2 at the same time  Unable to judge NEW QUESTION 169The two MSR routers RTA and RTB are interconnected through the 172.16.0.0/24 network segment. Now execute the following commands on the two routers:RTA]ospf 1RTA-ospf-1]area 0RTA-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.0.255RTB]ospf 100 RTB-ospf-100]area 1RTB-ospf-100-area-0.0.0.1]network 172.16.0.0 0.0.0.255From the above configuration, you can judge ______.  RTA and RTB can establish OSPF neighbor relationship  RTA and RTB cannot establish OSPF neighbor relationship. If the area ID is configured to be the same, OSPF neighbor relationship can be established  RTA and RTB cannot establish OSPF neighbor relationship. If OSPF process numbers are configured to be the same, OSPF neighbor relationship can be established  RTA and RTB cannot establish OSPF neighbor relationship. The OSPF process ID and area ID must be configured to be the same before OSPF neighbor relationship can be established NEW QUESTION 170There are a lot of static routes with tags of 100 and 200 on RTA. RTA and RTB run OSPF routing protocol, and RTB needs to learn all static routes on RTA. At the same time, it is required that on RTB, the priority of the route with tag 200 is 200.To achieve the above requirements, which of the following configurations is incorrect?  RTA configuration: ospf import-route static RTB configuration: route-polic2 permit node 10 if-match tag 200 ospf preference ase route-polic2 200  RTA configuration: route-polic1 permit node 10 if-match tag 100 appltag 100 route-polic1 permit node 20 if-match tag 200 appltag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if-match tag 200 ospf preference ase route-polic2 200  RTA configuration: route-polic1 permit node 10 if-match tag 100 appltag 100 route-polic1 permit node 20 if-match tag 200 appltag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if-match tag 200 applpreference 200 ospf preference ase route-polic2 150  RTA configuration: route-polic1 permit node 10 if-match tag 100 route-polic1 permit node 20 if-match tag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if-match tag 200 applpreference 200 ospf preference ase route-polic2 150 NEW QUESTION 171Regarding filter-polic filtering OSPF routes, which of the following statements are correct?  OSPF routes can be filtered by configuring ACL  It is not possible to filter OSPF routes through the IP address prefix list  OSPF routing information can be filtered by the next hop based on the routing information to be added to the routing table  It is not possible to filter routing information through interfaces NEW QUESTION 172In BGP protocol messages, unreachable routing information is advertised through ______.  NOTIFICATION  UPDATE  KEEPALIVE  ROUTE-REFRESH NEW QUESTION 173The PBR configuration on a router is as follows.polic-based-route pbr_a permit node 10if-match acl 3000apploutput-interface serial 2/0polic-based-route pbr_a dennode 20if-match acl 3000Assuming that the policy has been successfully applied, how will the data flow matching Acl 3000 on the router be forwarded?  Data flow matching Acl 3000 will not be forwarded according to policy routing  The data flow matching Acl 3000 will not be forwarded according to the normal route  Data streams matching Acl 3000 will be forwarded according to the default route  Data streams matching Acl 3000 will be discarded NEW QUESTION 174Which of the following methods of routing filtering are feasible?  By filtering routing protocol packets  By filtering routing information carried in routing protocol packets  For OSPF, routing information calculated by filtering LSDB  For OSPF, pass Type 3 LSA NEW QUESTION 175The description of NET in IS-IS is wrong.  The full name of NET is Network EntitTitle, which is similar to the Router ID in OSPF and BGP  NET is a special type of NSAP address  In the IP network, the NSEL value in the NET address is all 0  Each router can have up to 3 NETs, and these three NETs can be arbitrary NEW QUESTION 176Run the command on the router and its display information as follows:<RTA>displaisis peerPeer information for ISIS(1)—————————-Stem Id: 2222.2222.2222Interface: Eth0/0 Circuit Id:State: Up HoldTime: 27s Tpe: L1 PRI: 16Stem Id: 3333.3333.3333Interface: Tun3 Circuit Id:State: Up HoldTime: 25s Tpe: L2 PRI: –From the above information, you can know RTA______.  It is a Level-1-2 router  Is a Level-2 router  The ports connected to the two neighbors are not of LAN type  The type of port connected to the neighbor whose Stem-ID is 2222.2222.2222 is LAN NEW QUESTION 177Two MSR routers RTA and RTB are connected through the 192.168.1.0/20 network segment. Now execute the following commands on the two routers:RTA] ospf 1RTA-ospf-1] area 0RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255RTB] ospf 100RTB-ospf-100] area 1RTB-ospf-100-area-0.0.0.1] network 192.168.1.0 0.0.0.255From the above configuration, you can judge ______.  RTA and RTB can establish OSPF neighbor relationship  RTA and RTB cannot establish OSPF neighbor relationship. If the area ID is configured to be the same, OSPF neighbor relationship can be established  RTA and RTB cannot establish OSPF neighbor relationship. If OSPF process numbers are configured to be the same, OSPF neighbor relationship can be established  RTA and RTB cannot establish OSPF neighbor relationship. The OSPF process ID and area ID must be configured to be the same before OSPF neighbor relationship can be established NEW QUESTION 178In the IS-IS network as shown in the figure, the RTA, RTB, and RTC configurations are as follows:RTA]isisRTA-isis-1]is-level level-1RTA-isis-1]network-entit01.1111.1111.1111.00RTA-isis-1]interface serial 2/0RTA-Serial2/0]isis enable 1RTB]isisRTB-isis-1]is-level level-1RTB-isis-1]network-entit01.2222.2222.2222.00RTB-isis-1]interface serial 1/0RTB-Serial1/0]isis enable 1RTB-Serial1/0]interface Ethernet 0/0RTB-Ethernet0/0]isis enable 1RTC]isisRTC-isis-1]is-level level-1RTC-isis-1]network-entit01.3333.3333.3333.00RTC-isis-1]interface Ethernet 0/0RTC-Ethernet0/0]isis enable 1RTC-Ethernet0/0]interface Ethernet 0/1RTC-Ethernet0/1]isis enable 1After the routes of each router are stable, the cost of IS-IS route 192.168.3.0/24 on RTA is ______.  3  2  1563  30  20 NEW QUESTION 179Among the following types of LSAs, the ones allowed in the backbone area are _________  Tpe1 LSA  Tpe2 LSA  Tpe3 LSA  Tpe4 LSA NEW QUESTION 180Regarding the BGP aggregation function, which of the following statements are correct?  BGP aggregation is divided into automatic aggregation and manual aggregation.  Because BGP supports CIDR, BGP automatic aggregation can automatically aggregate the routes that exist in the routing table into natural mask routes.  BGP manual aggregation can advertise aggregated routes and specific routes at the same time, or select specific routes to generate aggregated routes.  When using BGP manual aggregation, you can use the attribute-polic- parameter to change the attributes of the aggregated route for more flexible control. NEW QUESTION 181In the topology shown in the figure, execute the following commands on RTA:RTA-ospf-1] default-route-advertiseThe default route cannot be observed in the routing table of the RTC router. The reason for the impossible is ______  There is no default route in RTA’s routing table  Area1 is configured as an NSSA area  The routing policy is configured on RTB to filter the default route  A routing policy is configured on the RTC to filter the default route NEW QUESTION 182In the OSI network, Level-0 routing exists in _______.  Between ES and IS  Between IS and IS in the same area  Between IS and IS between different regions  Between IS and IS between different routing domains NEW QUESTION 183Run the command and display information on the router as follows:<RTC>displisis lsdb level-1 verboseDatabase information for ISIS(1)——————————–Level-1 Link State DatabaseLSPID Se Num Checksum Holdtime Length ATT/P/OL————————————————– —————————–3333.3333.3333.00-00* 0x0000007c 0x5fae 388 58 1/0/0SOURCE 3333.3333.3333.00NLPID IPV4AREA ADDR 02INTF ADDR 10.1.3.2INTF ADDR 10.3.4.1NBR ID 4444.4444.4444.00 COST: 103333.3333.3333.00-01* 0x0000008f 0x55ae 388 113 0/0/0SOURCE 3333.3333.3333.00IP-Internal 10.1.3.0 255.255.255.252 COST: 10IP-Internal 10.3.4.0 255.255.255.252 COST: 10IP-Internal* 172.16.3.1 255.255.255.255 COST: 10IP-Internal* 10.1.2.0 255.255.255.252 COST: 20IP-Internal* 192.168.18.0 255.255.255.0 COST: 30IP-Internal* 172.16.2.1 255.255.255.255 COST: 20IP-Internal* 172.16.1.1 255.255.255.255 COST: 204444.4444.4444.00-00 0x00000111 0x9817 1098 62 1/0/0SOURCE 4444.4444.4444.00NLPID IPV4AREA ADDR 02INTF ADDR 10.3.4.2INTF ADDR 10.2.4.2INTF ADDR 172.16.4.1NBR ID 3333.3333.3333.00 COST: 104444.4444.4444.00-01 0x0000006f 0x8952 1098 65 0/0/0SOURCE 4444.4444.4444.00IP-Internal 10.3.4.0 255.255.255.252 COST: 10IP-Internal 10.2.4.0 255.255.255.252 COST: 10IP-Internal 172.16.4.1 255.255.255.255 COST: 0From the above information, you can know _________.  The area code of RTC is 02  The Stem-ID of RTC is 4444.4444.4444  The address 10.3.4.2 belongs to the router with Stem-ID 4444.4444.4444  There are 7 pieces of Level-1 IP internal reachable routing information carried by the router with the Stem-ID of 3333.3333.3333 NEW QUESTION 184Perform the following configurations on RTA, RTB, and RTC in the topology shown in the figure:RTA-GigabitEthernet0/0] ip address 192.168.2.1 255.255.255.0RTA] ospf 1 router-id 1.1.1.1RTA-ospf-1] area 1RTA-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255RTB-GigabitEthernet0/0] ip address 192.168.2.2 255.255.255.0RTB-GigabitEthernet0/1] ip address 192.168.3.1 255.255.255.0RTB] ospf 1 router-id 2.2.2.2RTB-ospf-1] area 1RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255RTB-ospf-1] area 0RTB-ospf-1-area-0.0.0.0] network 192.168.3.0 0.0.0.255RTB-ospf-1]import-route directRTC-GigabitEthernet0/0] ip address 192.168.3.2 255.255.255.0RTC] ospf 1 router-id 3.3.3.3RTC-ospf-1] area 0RTC-ospf-1-area-0.0.0.0] network 192.168.3.0 0.0.0.255Then the types of LSAs generated by RTB in the OSPF area are _______  Tpe1 LSA  Tpe2 LSA  Tpe3 LSA  Tpe4 LSA  Tpe5 LSA NEW QUESTION 185In the network shown in the figure, BGP routing learning between routers is normal, and BGP routing attributes all take default values. After the route 8.0.0.0 is imported into BGP on RTA, if the next hop of route 8.0.0.0 on RTD is to point to RTC, the following adjustment methods are feasible: ______.  Set the Local Preference value of the route sent by RTB to RTD to 200  Set the Local Preference value of the route sent by RTB to RTD to 50  Set the Local Preference value of the route sent by RTC to RTD to 200  Set the Local Preference value of the route sent by RTC to RTD to 50 NEW QUESTION 186There is definitely no ______ type LSA in the OSPF stub area.  Tpe3  Tpe4  Tpe5  Tpe7  Loading … Get New GB0-381-ENU Certification Practice Test Questions Exam Dumps: https://www.vceprep.com/GB0-381-ENU-latest-vce-prep.html --------------------------------------------------- Images: https://certify.vceprep.com/wp-content/plugins/watu/loading.gif https://certify.vceprep.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-05-23 23:22:56 Post date GMT: 2022-05-23 23:22:56 Post modified date: 2022-05-23 23:22:56 Post modified date GMT: 2022-05-23 23:22:56